Pallet RackingSelective Pallet Racking
Direct access to every pallet position. The default choice for 3PLs, retail DCs and manufacturers managing many SKUs with fast turnover.
- 100% Pallet Access
- Single or Double Deep
- 48″ × 40″ GMA Ready
ISO 9001:2015Certified quality system
10,000+ ProjectsDelivered since 2001
323,000 sq ftManufacturing campus
US & Canada PortsContainer-optimized packing
Featured Products
View All Products Warehouse Racking & Mezzanine Systems for Every Throughput
From 100% selective access to deep-lane, high-density storage, each system is roll-formed, punched, welded and powder-coated in-house, with load ratings supplied in pounds per beam level so your team can plan against real North American pallet weights.
Pallet Racking
High DensityDrive-In Racking
Forklifts drive into the rack to store deep lanes of the same SKU, eliminating most aisles. Ideal for seasonal, bulk and frozen goods on LIFO rotation.
- Up to 75% Fewer Aisles
- LIFO
- Heavy Structural Rails
Dynamic StoragePallet Flow (Gravity) Racking
Inclined roller lanes move pallets from load face to pick face by gravity, enforcing true FIFO for date-coded food, beverage and pharmaceutical stock.
- True FIFO
- Speed Controllers
- High Throughput
Semi-AutomatedRadio Shuttle Racking
A battery-powered shuttle carries pallets inside the lane, so forklifts never enter the rack. Supports FIFO or LIFO and reduces rack impact damage.
- FIFO & LIFO
- Remote Controlled
- Freezer Compatible
Long LoadsHeavy-Duty Cantilever Racking
Open-front arms store lumber, pipe, tubing, rebar and sheet goods without vertical obstruction. A staple for lumber yards and building supply dealers.
- Up to 6,600 lbs / Level
- Single or Double Sided
- Outdoor Finish Option
High DensityPush Back Racking
Nested carts on inclined rails store 2–6 pallets deep per lane. Delivers drive-in density while keeping more SKUs accessible at each pick face.
- 2–6 Pallets Deep
- LIFO
- Selective Faces
MezzanineStructural Steel Mezzanine
Free-standing platforms for picking, packing, offices or light assembly. Custom decking, stairs, gates and handrails specified to your layout.
- 61–205 psf Rated
- Custom Spans
- Gates & Stairs
MezzanineRack-Supported Mezzanine
Pallet racking carries a walkable picking floor above, combining bulk storage below with each-pick, packing or sorting operations overhead.
- Multi-Tier Picking
- Integrated Racking
- Custom Load Capacity
Buyer's Selection Guide
Which Pallet Racking System Fits Your Operation?
Most racking decisions come down to three variables: how many SKUs you carry, how many pallets per SKU, and whether stock must rotate first-in, first-out. Use this engineer-prepared comparison as a starting point before requesting a layout.
| System | Pallet Access | Storage Density | Rotation | Best Fit |
|---|---|---|---|---|
| Selective | Every pallet | Any | High-SKU 3PL, retail and e-commerce DCs | |
| Double Deep | First of two | LIFO | Mid-SKU warehouses with reach trucks | |
| Push Back | Front of lane | LIFO | Beverage, building products, 2–6 pallets per SKU | |
| Drive-In | Lane entry | LIFO | Cold storage, seasonal and bulk single-SKU stock | |
| Pallet Flow | Pick face | FIFO | Date-coded food, beverage and pharma | |
| Radio Shuttle | Lane end | FIFO / LIFO | Freezers and high-volume deep-lane storage | |
| Cantilever | Open front | Any | Lumber, pipe, steel and long loads |
Density ratings are relative and assume equal building footprint and clear height. Final capacity depends on pallet size, load weight, forklift type and local code requirements reviewed by your engineer of record.
Racking Manufacturer Since 2001
About HEDA Shelves
Guangzhou Heda Shelves Co., Ltd. has designed and manufactured warehouse storage systems since 2001. Our 30,000 m² (approx. 323,000 sq ft) factory and 300+ skilled workers and engineers produce up to 30,000 tons of racking steel per month, covering selective, drive-in, push back, pallet flow, radio shuttle and cantilever racking, plus industrial shelving and mezzanine floors.
For North American buyers, we operate as a one-stop partner: layout design, structural calculation, manufacturing, container loading and installation guidance are handled by a single team, giving you one point of accountability from first drawing to final inspection.
- 25+ years of racking design and production experience
- 10,000+ warehouse projects completed for distribution, manufacturing and cold chain clients
- Imperial-unit drawings and load tables ready for your installer and engineer of record
- OEM & ODM programs for dealers, integrators and private-label brands
Factory VideoSee our roll-forming, welding & powder coating lines
2001
Year Established
25+ years in racking
300+
Technical & Production Staff
Engineers, welders, QC
30,000t
Monthly Production Capacity
Metric tons of steel
323,000
Sq Ft Factory Site
30,000 m² facility
Key Strengths
Why North American Buyers Choose HEDA Shelves
Procurement managers and warehouse operators work with us to reduce cost per pallet position without compromising on structural integrity, documentation or delivery reliability.
01
25+ Years of Expertise
Lessons from 10,000+ projects inform every beam connector, base plate and bracing pattern we specify.
02
Free 3D & CAD Layouts
Plan views, elevations and 3D renderings in feet and inches, so you can compare pallet positions before committing budget.
03
Safe, Durable Steel
Pickling, phosphating and electrostatic powder coating protect against corrosion, with batch QC before every container is sealed.
04
Fully Customized Systems
Frame heights, beam lengths, colors and accessories built around your pallets, forklifts and building constraints.
Industry Solutions
All Solutions Specialized Storage, Designed for Your Sector
Every industry has a different storage bottleneck. Select your sector to see the problem we solve most often and the systems we typically recommend.
Bagged goods, seasonal peaks, slow loading
Agriculture & Farm Supply
Storage systems for grain processors, seed companies, feed mills, fertilizer distributors and farm co-ops. We design around heavy bagged loads and seasonal volume swings so trucks load faster during planting and harvest.
Recommended Systems
- Selective Pallet Racking
- Drive-In Racking
- Wire Mesh Decking
Thousands of SKUs, mixed sizes, missed picks
Auto Parts & Aftermarket
From tires and bumpers to clips and fasteners, automotive inventory spans every size. We combine longspan shelving, tire racks and rack-supported mezzanines so dealerships and aftermarket distributors pick faster in less floor space.
Recommended Systems
- Longspan Shelving
- Rack-Supported Mezzanine
- Selective Racking
Bulky long loads, wasted yard space
Building Supplies & Lumber
Pro dealers, lumber yards and building material distributors need open-access storage for long, heavy and awkward stock. We specify cantilever, pallet and drive-in racking that keeps lumber, drywall, pipe and roofing organized indoors or out.
Recommended Systems
- Cantilever Racking
- Drive-In Racking
- Mezzanine Floor
Crushed floor-stacked goods, weak FIFO control
Food & Beverage Distribution
For food manufacturers, beverage producers, grocery wholesalers and cold chain 3PLs. Pallet flow and push back systems enforce date rotation, reduce product damage from floor stacking and support audit-ready traceability.
Recommended Systems
- Pallet Flow Racking
- Push Back Racking
- Carton Flow Racking
Expensive cubic feet, congested cold aisles
Cold Storage & Freezers
Every cubic foot of refrigerated space carries energy cost. High-density drive-in and radio shuttle racking can store significantly more pallets in the same freezer footprint, while coatings and components are selected for low-temperature duty.
Recommended Systems
- Radio Shuttle Racking
- Drive-In Racking
- Cold Storage Pallet Racking
Unstable drums, mixed-storage risk
Chemical & Lubricant Storage
For chemical manufacturers, lubricant distributors and paint warehouses. Heavy-duty racking with drum supports, safety accessories and segregated layouts helps you organize hazardous and non-hazardous inventory in line with your site's safety plan.
Recommended Systems
- Heavy-Duty Pallet Racking
- Safety Accessories
- Wire Mesh Containers
Project Experience
Proven Warehouse Racking Case Studies
Real installations designed, manufactured and shipped by our team. Each project follows the same engineering, QC and export documentation process we use for US and Canadian customers.
Heavy-Duty Racking for Chemical Drum Storage
Reinforced uprights and heavy beams sized for drum and IBC loads, with a segregated layout for safer handling.
Pallet Racking Projects
Rack-Supported Mezzanine for Manual Picking
A multi-level picking floor built on pallet racking to add pick faces without expanding the building.
Mezzanine Projects
Multi-Level Mezzanine for Auto Parts
Reinforced racking supports multiple picking tiers for thousands of mixed-size automotive SKUs.
View Case Studies How We Work
From Floor Plan to Container in Four Clear Steps
A transparent workflow with written approvals at each stage, so your purchasing, operations and engineering teams always know what happens next.
Consult & Quote
Share your building drawing, clear height, pallet specs and forklift data. Receive an itemized quote within 24 hours.
Engineer & Design
CAD plans, elevations, 3D renderings and structural calculations prepared for your engineer of record.
Manufacture & QC
In-house roll forming, welding and powder coating with dimensional and coating checks on every batch.
Ship & Support
Container-optimized packing, labeled bundles and installation drawings for a faster install on site.
Production Process
Inside Our 10-Step Racking Production Line
Every upright and beam passes through the same controlled sequence before it leaves the factory.
STEP 01Raw Materials
Certified steel coil inspected on arrival.
STEP 02Precision Cutting
Coil slit and cut to exact profile widths.
STEP 03Column Punching
Automated punching for consistent beam pitch.
STEP 04Cold Bending
Cold-formed sections for higher strength.
STEP 05Profile Forming
Roll-formed uprights and box beams.
STEP 06Polishing
Edges and welds deburred for safe handling.
STEP 07Welding
Connectors and base plates welded to spec.
STEP 08Pickling & Phosphating
Pretreatment for coating adhesion.
STEP 09Powder Coating
Electrostatic finish in your specified color.
STEP 10QC & Shipping
Final inspection, labeling and container loading.
Quality & Compliance
Independently Certified Quality
Third-party certification gives your procurement and safety teams verifiable evidence of how we manufacture. Certificate copies are available for supplier qualification and vendor onboarding.
ISO 9001:2015Certificate No. 18624Q00169R0MValid to 2027-06
CE MarkingNo. 2435-CPR-8605159Construction Products
RoHS ComplianceRestricted hazardous substancesMaterials
Trusted by Brands & Distributors Worldwide
Expert Insights
Warehouse Racking Guides from Our Engineers
Practical knowledge for planners and buyers comparing systems, layouts and budgets.
Dynamic Storage Racking: Drive-In, Push Back, Pallet Flow & Radio Shuttle
How the four high-density systems differ in access, rotation and cost per position.
Warehouse Mezzanine Layout Design for Racking Projects
Stair placement, load ratings and egress planning for a productive second level.
Warehouse Racking System Design & Layout
Aisle widths, flue spaces and beam elevations explained for forklift-driven operations.
Warehouse Racking Price Guide: What Drives Project Cost
Steel tonnage, finish, accessories and freight: the real cost drivers behind a quote.
FAQ for US & Canadian Buyers
Importing Warehouse Racking: Your Questions Answered
Do you ship pallet racking to the United States and Canada?
Yes. Systems are packed for ocean freight in 20 ft and 40 ft containers and shipped to major North American ports such as Los Angeles/Long Beach, Houston, Savannah, New York/New Jersey and Vancouver. FOB and CIF terms are standard, and delivered options can be discussed per project.
Can you provide load ratings in pounds and feet?
Yes. Layouts and load tables can be issued in both imperial (lbs, ft, in) and metric units so your team, installer and engineer of record can review them without conversion.
Do you support permit and seismic review?
We supply structural calculations, component specifications and shop drawings for each project. These documents are prepared to support review by your local engineer of record, who stamps drawings and confirms seismic and permit requirements for your jurisdiction.
How fast can I get a layout and quotation?
Send your building dimensions, clear height, pallet size, pallet weight and forklift type. Our engineers typically return a CAD layout, 3D rendering and itemized quotation within 24 hours.
Is the racking compatible with 48″ × 40″ GMA pallets?
Yes. Beam lengths, frame depths and pallet supports are sized around 48″ × 40″ GMA pallets as well as custom pallet and container sizes used in your facility.
Free Quotation
Ready to Design Your Warehouse Storage System?
Share your requirements today and receive a free layout, structural calculation and itemized quotation, typically within 24 hours.
Request a Free QuoteWhat to Include for an Accurate Quote
- 1Building footprint and clear height (ft)
- 2Pallet size and maximum weight (lbs)
- 3Forklift type, lift height and aisle preference
- 4SKU count and rotation needs (FIFO / LIFO)
No. 133-1, Tingyuan Road, Haizhu District, Guangzhou, China
Contact Our Engineers Your drawings and project data are kept strictly confidential.